Large washing equipment includes washing machines, dryers, folding machines, ironing machines, and other large equipment. The normal service life of large washing equipment is about eight years. If the equipment is not regularly maintained or operated according to specifications, it will age prematurely and cause various problems. Jiangsu Yingchuang will explain to you the daily maintenance work of different types of washing equipment.

The washing machine is the most basic equipment in large-scale washing equipment. Nowadays, washing machines are becoming increasingly intelligent. So, how should we maintain them in daily life

1. Check if there are any abnormal sounds and vibrations in the main motor, and if there is any abnormal heating; Are all connecting components loose; Is the cooling fan of the frequency converter operating normally.

2. Regularly check the tightness of the transmission triangle belt; Check if the lower water outlet of the main bearing seat is smooth to ensure that there is no water accumulation in the bearing and to extend its service life.

Drying machines can be divided into industrial and civilian types. Industrial drying machines, also known as drying equipment or dryers, are a type of washing machinery used to remove moisture from clothing and other textiles after water washing and dehydration. Daily inspection of the dryer:

When starting up and drying for the first time, the drain bypass valve must be opened first to drain the condensed water in the heater and steam pipeline, and then the drain bypass valve must be closed. After finishing work every day, drain the remaining water, open the front door, and close the main intake valve and main intake valve.

Folding machine is an auxiliary equipment for clothing processing. Control the speed and positioning of the fabric conveying system, measure the length of the fabric and calculate the folding length, and complete horizontal and cross folding through the jet and refraction of the airflow. Daily inspection of the folding machine:

1. If there are trapped or blocked linens in the washing equipment, they must be removed first. Because thin cotton tape or yarn can cause the photoelectric switch to turn black or change the effective diameter of the roller.

2. If the washing equipment has been shut down for a long time, it should be run according to the normal program for 5 minutes before starting up, so as to confirm whether the washing equipment is running normally without noise.

Every year: Check the wear of the clutch and brake, and make corresponding adjustments or replacements if necessary.

Every five years: Replace the PLC battery. If you have any questions, please inquire with the manufacturer.

Flattening machine is a type of washing machinery, belonging to laundry room ironing equipment. Its main components are usually a single or two rollers (modern ironing machines may contain three rollers). The rollers are rotated by hand or electricity to a certain temperature. When damp clothes pass between the two rollers, a large amount of moisture can be removed and the ironing effect can be achieved. Used for the flattening process of bed sheets, tablecloths, fabrics, and so on.

1. When using a speed regulating motor and frequency converter control knob to adjust the speed of the ironing machine, it should be adjusted slowly and evenly, avoiding sudden increases and decreases to ensure its service life.

2. Due to the fact that the hot stamping machine is a high-temperature equipment, it should be operated at low speed with the heat source turned off until its drum is fully cooled before stopping, in order to avoid shortening the service life of each guide belt due to prolonged high temperature (especially for electric heating hot stamping machines).

Large scale washing equipment has enhanced work efficiency and improved cleaning quality for our enterprise. Good equipment should be regularly maintained to extend its lifespan and better serve us.